Model/Serial # Location
Where to Locate Your Coolers Model & Serial Numbers
If you are in need of a gasket and are unsure where to begin your search to find a replacement gasket, start by locating the data plate on your cooler or freezer. Most data plates can be found by looking inside your unit on one of the inside walls. Once you have located the model and serial, you can call the manufacturer and request the parts department. Once on the phone with the parts department, they will request the model and serial numbers off your unit. Once they have that information they can look up in their system the part number for the replacement gasket needed for your cooler/freezer. Once you have the part number for the gasket needed for your unit you can search for it by typing it in our search bar at the top of our website. If you have the OEM part number from the factory and are having troubles locating it on our site, please contact us at (855) 288-2259 and we will assist in locating the correct gasket for you.
Sometimes manufacturers change which gasket goes on a unit based on the year it was manufactured, in this case a serial number is required to locate the correct replacement gasket. In other cases, all models will have the same gasket regardless on when it was manufactured, please confirm you are purchasing the correct gasket by measuring your existing gasket and comparing it to what is on our site.
If you are having trouble locating the data plate on your unit or locating the model/serial numbers on your data plate it is possible that it has been rubbed off or removed. Sometimes abrasive cleaning solutions are used and that could result in missing data plates or illegible model/serial numbers. If you have looked all over your unit and can't find any information as to what your model and serial number are, please visit our Custom Made Gaskets section to build your own replacement gasket.
On a True Manufacturing cooler/freezer, the manufacturer's data plate can be located by opening the door and looking on the left or right have inside wall. The model number will be found next to the field titled "Model". The serial number will be found next to the field titled "Cabinet Serial Number". The serial is usually a "1" then a dash or a space followed by 7 digits as shown above. The "1-" doesn't really do anything, the 7 digit number is what the manufacturer needs to pull up the specs for your unit. If you are only seeing 6 digits after the "1-" this could be telling you that the unit is an older unit or that one of the numbers has been rubbed off. Call the manufacturer to confirm the model with your serial and request a gasket part number.
|On a cooler/freezer manufactured by Beverage-Air, the manufacturer's data plate will most likely be found inside the unit on the right or left hand wall. The model number can be found next to the field titled "Model". The serial number can be found near the barcode near the data plate. The serial should be 7 digits long as depicted in the image above. Call the manufacturer and provide them the model (and serial if possible) and request a gasket part number.|
|On a Master-Bilt cooler or freezer, the data plate can be found inside the unit on one of the inside walls. Model number can be found next to the field titled "Model" and serial number can be found near the field titled "Cabinet Ser. No.".|